Ready to design your first one-of-a-kind piece of clothing or accessory? Use our handy Customization Guide to walk you through the process!
MyWear® - Guide to Customization.
Select an item from the product menu. From there, you'll be taken to the "design your own" page for a closer look at your selected item. Press “Customize & Buy” to be taken to the 3D design tool.
Uploading Art
Once in the 3D design tool, upload your art with the "add artwork" button. Your art can be created in a number of ways, including: Photoshop, Microsoft Paint, Adobe Illustrator, a photograph, or a picture of something you’ve drawn or painted. We suggest uploading art in a large size and with a 300 pixels/inch ratio to ensure high clarity.
Auto Fit
When your art first appears on your product, in some cases it will not fit the entire piece. Use the “Auto Fit” button to automatically fill your entire design.
Apply Image To
If you only want to apply art to specific sections of your design, use the “Apply Image To” dropdown to add art to desired panels, or uncheck components where you don’t want your art to be applied.
Scaling and Moving Art
To make your art appear on a larger scale, use the plus sign. To scale smaller, use the minus option. The arrows will align art further to the left or right, or higher or lower. The small center button will make your arrows move in smaller increments.
Additional Artwork Tabs
If you’re planning on using more than one artwork on your piece, you can use the additional artwork tabs to do so.
Clone Tool
Use the clone tool to clone your art to a second artwork tab.
Applying Color
To apply solid color, go to the color tab and uncheck “art” in the component you’d like to apply color to. Click the color box and use the dropper to choose the color you’d like to apply to the selected section, either using our color tool bar, color wheel, your art, or by entering a color hex code.
Mirror & Copy Functions
You can also find the "mirror" and "copy" functions located in the color tab. Use these to copy or mirror the art from one side onto the other. For example, for symmetrical sleeves, use the color tab’s dropdown menu under “Mirror” and select “Mirror” to make the left component symmetrical with the right. Select “Copy” from the “Mirror” dropdown to apply an identical copy of the art onto the other sleeve.
Adding Text
Use the text tab to add text to your design. Enter desired text into one of the four corresponding lines and click “Apply”. Select a font and size using the dropdowns. Use the arrows to move text to desired location.
When finished with your design, double check to make sure art is covering the entire piece.
Select "Buy Now" in bottom right corner to be taken to checkout.